ProductsBrushless Motor Cores

MINFAI · PRODUCT SERIES

BLDC stator laminations & brushless motor cores

Discuss stator and rotor core requirements for a brushless motor design.

Share your drawing and project needs so we can review dimensions, materials and supply scope for your design.

Brushless Motor Cores
Product photograph from the Minfai catalog

Custom BLDC stator laminations and laminated cores

Minfai works with motor manufacturers on stator laminations and finished core stacks for brushless DC motor designs. The inquiry should identify the stamped component or laminated core required, the supply stage and the current drawing revision. Motor power alone does not define the lamination geometry.

For an inner-rotor or outer-rotor layout, review the actual stator tooth profile, slot opening, winding clearance, mounting references and stack construction. Rotor designs vary: a brushless motor inquiry does not automatically include a laminated rotor core, magnets or an assembled motor. Specify each requested component so the quotation can define its scope.

Find a BLDC reference by diameter and slot count

The BL-series product gallery includes photographs and the existing catalog annotations. Use outside-diameter, inside-diameter and slot-count ranges to narrow the references, then compare the tooth shape, mounting features and drawing revision. A shared diameter and slot count do not make two cores interchangeable.

Include the selected BL reference in your inquiry together with the component drawing, material requirement, loose-lamination or finished-stack scope, sample quantity and expected production quantity. Where a catalog annotation is incomplete, or the rotor A × B notation is unclear, send a drawing for review rather than treating the annotation as a verified specification.

Drawing and purchasing review points

Requirement Information to include
Magnetic arrangement Inner or outer rotor, stator layout and the precise component included in the inquiry.
Tooth and slot profile Slot opening, tooth profile, winding clearance and the drawing’s critical dimensional references.
Stack and interfaces Finished stack height, bore or mounting references, and the inspection points needed for assembly.
Material definition Electrical steel grade, lamination thickness and any specified insulation requirements; supply options are reviewed before quotation.

Questions before component procurement

Does every brushless motor need the same rotor core?

No. Rotor structures differ between motor designs. Show the actual rotor construction and identify the part you need quoted, including whether the request is for laminations, a stack or another metal component.

What helps distinguish two similar-looking BLDC stators?

Compare the drawing revision, tooth and slot profiles, material, thickness, stack height and mounting references. A shared outside diameter does not establish that the cores are interchangeable.

PRODUCT PHOTOGRAPHS

Series and product references

Browse product photographs and series references from the Minfai catalog. Confirm the application, dimensions, material, stack height and availability against your project drawing.

The short code is a website inquiry reference, not a dimension or manufacturer model. Similar appearance does not establish interchangeability.

Combine ranges to filter references. Diameter ranges include the lower bound and exclude the upper bound; slot ranges include both bounds. Only annotated catalog parameters are matched. Confirm units and tolerances against drawings.

Rotor dimension annotations

A and B are the two values in the catalog rotor annotation A × B. Their physical meaning has not yet been assigned.

BL-01 — OD 28.2×ID 16.5 / rotor 14.×ID 5

BL-01

OD 28.2×ID 16.5 / rotor 14.×ID 5

Outside dia.
28.2
Inside / bore dia.
16.5
Rotor inside dia.
5

Incomplete catalog annotation; please confirm against your drawing.

Enquire about this product →

BL-02 — OD 33.6×ID 21.7-12 slots / rotor 18×6

BL-02

OD 33.6×ID 21.7-12 slots / rotor 18×6

Outside dia.
33.6
Inside / bore dia.
21.7
Slots
12
Rotor annotation A
18
Rotor annotation B
6

Enquire about this product →

BL-04 — OD 35×ID 18.9-6 slots / rotor

BL-04

OD 35×ID 18.9-6 slots / rotor

Outside dia.
35
Inside / bore dia.
18.9
Slots
6

Incomplete catalog annotation; please confirm against your drawing.

Enquire about this product →

BL-05 — OD 39.6×ID 23-6 slots / rotor 15.5×5

BL-05

OD 39.6×ID 23-6 slots / rotor 15.5×5

Outside dia.
39.6
Inside / bore dia.
23
Slots
6
Rotor annotation A
15.5
Rotor annotation B
5

Enquire about this product →

BL-06 — OD 40×ID 24-6 slots / rotor 22×ID 5

BL-06

OD 40×ID 24-6 slots / rotor 22×ID 5

Outside dia.
40
Inside / bore dia.
24
Slots
6
Rotor annotation A
22
Rotor annotation B
5
Rotor inside dia.
5

Enquire about this product →

BL-07 — OD 55×ID 27-6 slots / rotor 21.45×8

BL-07

OD 55×ID 27-6 slots / rotor 21.45×8

Outside dia.
55
Inside / bore dia.
27
Slots
6
Rotor annotation A
21.45
Rotor annotation B
8

Enquire about this product →

BL-08 — OD 56.2×ID 28-12 slots / rotor 26×8

BL-08

OD 56.2×ID 28-12 slots / rotor 26×8

Outside dia.
56.2
Inside / bore dia.
28
Slots
12
Rotor annotation A
26
Rotor annotation B
8

Enquire about this product →

BL-09 — OD 58×ID 27-9 slots / rotor 26×8  / material annotation 0.5

BL-09

OD 58×ID 27-9 slots / rotor 26×8 / material annotation 0.5

Outside dia.
58
Inside / bore dia.
27
Slots
9
Rotor annotation A
26
Rotor annotation B
8

Enquire about this product →

BL-10 — OD 58×ID 27-9 slots / rotor 26×8  / material annotation 0.35

BL-10

OD 58×ID 27-9 slots / rotor 26×8 / material annotation 0.35

Outside dia.
58
Inside / bore dia.
27
Slots
9
Rotor annotation A
26
Rotor annotation B
8

Enquire about this product →

BL-11 — OD 60×ID 34.5-6 slots / rotor  33.2×ID 8

BL-11

OD 60×ID 34.5-6 slots / rotor 33.2×ID 8

Outside dia.
60
Inside / bore dia.
34.5
Slots
6
Rotor annotation A
33.2
Rotor annotation B
8
Rotor inside dia.
8

Enquire about this product →

BL-12 — OD 62×ID 33-12 slots / rotor  31.1×ID 9.95

BL-12

OD 62×ID 33-12 slots / rotor 31.1×ID 9.95

Outside dia.
62
Inside / bore dia.
33
Slots
12
Rotor annotation A
31.1
Rotor annotation B
9.95
Rotor inside dia.
9.95

Enquire about this product →

BL-13 — OD 94×ID 48-6 slots / rotor  46.5×12

BL-13

OD 94×ID 48-6 slots / rotor 46.5×12

Outside dia.
94
Inside / bore dia.
48
Slots
6
Rotor annotation A
46.5
Rotor annotation B
12

Enquire about this product →

Let us review your motor component

Share your drawing status and project needs to agree the next step.

Request a quote →